Roadmap - StellarDock

Achieving Focus on T72

I have tried to acquire narrowband images with T72 with an almost full moon (about 100 degrees separation from the target) a couple times in the last days. Unfortunately focus failed on both occasions. I know from using T72 on the original platform that the system uses luminance which can be a bit tricky. On at least one other scope I have used (SSO?) I noticed that the software switched to using a red filter for focus if it fails a number of times with Lum. If this is not implemented on T72 would you consider this a potential improvement? As you know narrowband imaging can be successful even with a near full moon if there is acceptable angular separation. Just a thought!

Calibration

I have used T20 and T74 both of which are colour cameras. With T74 the calibration files are 3-channel which I expected, but with T20 they are single channel. I have been able to achieve reasonable results with T20 using Cosmetic Correction to get rid of hot pixels, but why not provide 3-channel Calibration files like you have with T74. The sing channel bias master for T20 is seriously over-exposed which is really strange as it should be readout noise.

T25 File Naming: Include Binning

I have noticed that T25 file names do not include Binning eg (1×1, 2×2). The file size is a giveaway but inclusion of this would be nice.

"Viewing as" selector having more info

I’d love to be able to see more info about how a telescope interacts with a target like the % of frame filled by that target on that specific telescope Also having small preview images like from wikipedia or some other open license source on the discover page would be nice

Jazza T

Importing plans

I’d like to see support for some kind of text based plan importing like iTelscope could do, importing from telescopius or other services.

Jazza T

User Telescope Booking Overview

One feature I like about the old iTelescope platform is the booking summary. Maybe it is implemented but I cannot find it on the main page. If this feature is possible it would be great when a number of sessions on different scopes or repeats are booked over more than one week

Need Scope info on Target selection page

After I click on a scope to set up a run, I’d love to be able to see details about the scope - Scope type, dimensions, camera, filters, horizon, etc.

Dustin Kadrmas

Existing post, titel / content not editable - error message occours

Hello Support, I would like to edit one of my posts, but an error message occours after clicking “change content”. With reference to the attached screen-shot. Many Greetings Peter

Plan: Image Repeats

When you create plan with multiple filters it is not clear if repeats are performed together at the same time or as a group of repeats. In this respect the new interface is inferior to iTelescope with an image set then number of image set repeats. The rest of the interface is great. Need clear sky to test the operational side

Next up

Committed and queued

No Next up issues

In Progress

Actively being built

Hello Support,

at T2 the selected object is shown centered in the target editor, but no longer in the captured image. captured image target editor Best Regards Peter

Option not to Download jpg files

In the download options you have the choice to download calibration frames or not (downloading as default). I would suggest the most users probably don’t need JPG files and they are usually deleted to clean up their image directory as most users use an app to review the raw images before stacking. I would add the jpg download as an option under calibration files option. Just a very small suggestion

T2 - focusing fails

Hi Support, at 2026-Sep-07 and 2026-Sep-05 I started several image runs to check whether the new point model fits. But none of these 4 sessions are successfull, because of the focusing fails. For all 4 runs a refund was done. Many Greetings Peter

Done

Recently shipped

Last Image not immediately visible in preview on status page

Hi Support, at T2 I have captured IC5146 to check wether the pointing is meanwhile correct - it is another feedback. By chance I saw that on the T2 status page the “Last Image” was not updated. It’s not IC5146. It shows the image from the run before. With reference to the attached screenshot. Would it be possible to see the really last image in the preview window? Many Greetings Peter

Failed Booked Session does not Delete

I had a session booked for T72 but the roof was closed and the scope offline. I could have cancelled but when it was offline but let it stay to see what happened. The booked session passed but did not delete. Is this because the booking agent cannot talk to the telescope? I would be better if a session does not start for any reason it was deleted and points refunded but perhaps the telescope needed to be online

Mosaic Creation

It would be really good to have mosaic setup mode rather than setting up separate targets to achieve the end result

Name of the captured object not in filename

Hello Support, unfortunately the name of the object which was captured is not part of the filename. With reference to the attached screenshot as example. Many Greetings Peter

Bugs

Utah Desert - Different status information: Obs vs. telescope

Hi Support, I just witnessed this situation: the Observatory was stated as “Roof open”, but T20 was stated as “Roof Closed”. With reference to the attached screen-shot. My inteded image run was therefore canceled with the hint “Roof Closed”. But the Obs was open. Just a view seconds later all are open again. Many Greetings Peter

Siding Spring status incorrect

StellarDock says the roof is closed at Siding Spring, but I am imaging with my regular scope.

Gordon Myers

Target Editor and Discover Page are no more working

Hi Support, unfortunately the "target editor" and the "discover" page are no more working. With reference to the attached screenshots. Many Greetings Peter

"Telescopes" pre-selection on the "Discover" page when navigating from a specific telescope

Hi Support, When accessing the "Discover" page from the dashboard, all telescopes are selected by default under the "Telescopes" section—even if I had previously selected a specific telescope. However, in that scenario, I only want to see data relevant to that specific telescope. This means I have to deselect all the other telescopes. While this is manageable right now, if all telescopes were active, I would have to deselect about 21 others. In my point of view it is a bit inefficient. Would it be possible to have the system default to only the previously selected telescope under "Telescopes"—with all others deactivated—when navigating to "Discover" after having already chosen a specific telescope? Many Greetings Peter

Download as ZIP in "My Data" no more working in Brave and FireFox

Hi Support, I would like to download the images of my last run, but the Download in "My Data" is no more working at all. Below is the captured run for the download. After clicking "download data" that windows opens - with the information “Download as ZIP works in every browser. After clicking "Start Download" all files were compressed. But now window opens to select the download folder on my computer. Tested with Brave browser. The FireFox-Browser has another behabvior. The below error message pops up. In the Edge-browser it works - the download notification is in German language.

"Sign-in" must be clicked twice when login details are automatically transferred from KeePassXC to the browser

Hello Support, I use KeePassXC for logging in. The login details are automatically filled into the "Email" and "Password" fields. However, I have to click "Sign in" twice before an email containing the "verification code" is sent. If I copy and paste the "Email" and "Password" from KeePassXC, the "verification code" is sent immediately. Tested with the Brave browser. Many Greetings Peter